• Easier to assembly than anet a8. Only need to 12 steps can complete installation the creality 3d ender-3 3d printer. Save your install time, make more enjoy.
• Upgrade mk-10 extruder. Reduces plugging risk and bad extrustion. Make the printing process easier and reduce unnecessary trouble.
• Resume printing. Safely protected power supply and resume printing function, if the machine is shut down or power failure accidentally, it can continue printing after power on.
• Adopts v-slot linear bearing system and wheel moving parts, super noiseless and smooth printing performance, big hand twist nut ma ke the print platform easier to level.
• High quality 3d printer with ±0.1mm high printing accuracy, 220 * 220 * 250mm large printing size with one-piece structure.

 

About this item

• WORKS OUT OF THE BOX: 3 steps to set up ANYCUBIC Mega S 3D printer with 8 screws and 3 cables for minutes, not only meets fast assembly needs for expert users but also friendly use to beginners. Printing volume reaches 8.27 x 8.27 x 8.07 inches.
• UPGRADED EXTRUDER DESIGN: Titan extruder provides precise extrusion for your 3D printing with solid filament drive and overall mechanical design compatible with most filaments, greatly reducing the clogging risk and improving printing accuracy. Works with 1.75mm 3D Printer Filament such as TPU, PLA, ABS, HIPS, WOOD, etc.
• RESUME PRINT & SENSOR DETECTION: Mega S 3D Printer can resume printing after power outage or any other unexpected stoppage.One click to resume from the last recorded position when suffering power outages. And the sensor pauses prints and sets off an alarm when you run out of filament which greatly saves time and cost , printing volume reaches 8.27 x 8.27 x 8.07 inches.
• ANYCUBIC ULTRABASE: Patented 3D printer printing platform surface coated with patented microporous coating, with excellent adhesion when printing and then effortlessly falls off the bed when it cools to room temp at the end of the print.
• MORE FUNCTION: ①ANYCUBIC MEGA S is an all-in-one frame 3D printer. The rigid metal frame can minimize the shaking to improve the print quality; ②The double-rod motor is more durable than the traditional clutch motor, does not lose steps, has high precision and more model details can be restored; ③TFT Touch Screen-As responsive as operating on the phone

ANYCUBIC Mega S 3D Printer

The Mega S 3D printer is an innovative upgraded printer based on the classic Mega i3 3D printer. You only need to install the material rack, screw 8 screws, and plug in 3 wires to make it work.

• Technology: FDM (Fused Deposition Modeling)
• Metal Frame makes 3D Printing more stable
• High Quality Titan Extruder
• Machine Weight: ~24.3 pounds

Works out of the Box

3 steps to set up ANYCUBIC Mega S 3D printer with 8 screws and 3 cables for minutes, not only meets fast assembly needs for expert users but also friendly use to beginners.

High Precision and Stability

ANYCUBIC Mega S 3D Printer uses integrated rigid metal body, concise and generous, with tough lines, solid materials, and very stable structure, which can minimize body shaking during printing to improve the printing quality.

Larger Print Volume

Printing size: 210mm x 210mm x 205mm. Larger printing size, smaller machine volume. ANYCUBIC Mega S does its best to gather more high performance and provide more creative space.

High Grade Titan Extruder

ANYCUBIC Mega S 3D Printer Equipped with updated Titan extruder, the optimized combination of the classic extrusion system and straight-through V5 extrusion head, provides smooth feeding, not easy to jam, and compatible with flexible filament.

Upgraded ANYCUBIC Ultrabase

The newly upgraded heating integrated lattice printing platform is coated with a patented microporous coating on the surface. Strong adhesion, easy to take molds, rapid and stable heating, it can be used repeatedly without any loss of performance.

• Dual Gear direct extruder
• CR Touch automatic bed levelling
• Z axis dual screw
• 4.3inch LCD screen
• Build size - 220 x 220 x 270 mm / Nozzle diameter - 0.4 mm

Product Description

Creality Ender-3 S1

• Modeling Technology: FDM; Supported Filaments: PLA/TPU/PETG/ABS
• Printing Layer Thickness: 0.05-0.35mm
• Machine Net Weight: 9.1kg; Printing Size: 220*220*270mm
• Printing precision: ±0.1 mm
• Printing Speed: 150mm/s at the maximum. Recommended 60-100mm/s
• Extruder Gear ratio: 1:3.5
• Filament Sensor: supported
• Maximum Nozzle Temperature: 260°C
• Heatbed temperature: ≤ 100°C
• Extrusion method: Proximal extrusion
• Automatic Bed Leveling: CR Touch
• Power rating: 350W
• Rated Voltage: 115/230v 50/60Hz 4.5/2.5A
• Slicing Software: Creality Slicer/Cura/Repetier-Host/Simplify3D

Sprite Direct Dual-Gear Extruder

Sprite direct dual-gear extruder features two chrome steel gears that are engaged at 1:3.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of filaments without slipping and works extremely well in sprinting flexible filaments such as TPU. Compared with other direct extruders, the "Sprite: is lighter and features less inertia and more precise positioning.

High-precision Dual Z-axis

With a Z-axis dual-screw+Z-axis dual-motor design, Ender-3 S1 works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality.

CR Touch Automatic Bed Leveling

Our self-developed CR Touch 16-point automatic bed leveling technology saves you the trouble of manual leveling. Simple and easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the hotbed

96% of the printer body is pre-installed, making assembling extremely convenient with only 6 steps and the maintenance of the printer simple and easy

Power Loss Recovery and Filament Sensor

Ender-3 Si features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents.

Low-noise Design

The brand-new 32-bit silent mainboard runs at low decibel levels, greatly reducing noise to let you enjoy your printing.

4.3-inch LCD Screen

The 4.3-inch knob LCD Screen features a brand-new UI interface to facilitate simple interaction what allows you to experience operation by knob. It automatically dims out when inactive for 5 minutes, saving energy and protecting the environment.

Compatible with Various Filaments

Compatible with more filaments, it can print PLA, TPU, PETG, ABS, etc., enabling you to release your creativity.

PC Spring Steel Printing Platform

The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, which sticks to the surface immediately when released. The PC coating brings good adhesion and printed models can easily be removed by bending the print sheet.

•  Resume Printing after power-off: CR-10S S5 could resume prints after a power outage or lapse occurs.
•   Easy and Quick Assembly: only 10 minutes, need to install the Z v suite in XY platform, they can easily install.
•   Linear Bearing System: profile+pulley=zero gap fit, newest v-slot, bring high accuracy and low noise printing.
•   Precision Pulley moving parts: imported polymer material processing, wear a long time.
•   Industrial-grade Circuit Board: can print for 200 hours without pressure, with mature technology and stable performance.

Product Description

3D Galaxy presents CR-10 S5 3D printer with a large build volume and a stable mechanical structure. It can handle complex printing tasks and give out printing outputs. The printer has user-friendly interface and sophisticated components, integrated to enhance your 3D printing experience.

Large Build Volume

The CR 10-S5 has a large build volume of 500mm X 500mm X 500 mm. Although simple in appearance, it can be used to build complex and large size models and prototypes.

Smooth and Stable Printing

This 3D printer is built for stability and high quality output. It has XYZ aluminium V-slot bearing to make it run smoothly. It is also equipped with high quality synchronous belt, over long extrusion clamp and aviation grade connectors.

 

 

 

 

Digital Control Panel

The printer is provided with a digital control panel that facilitates easy operation. It is separated instead of being integrated with the frame, in order to meet the needs of adjusting the printing size and specifications.

 

 

 

 

 

 

MK 10 Extruder

The printer is integrated with an MK 10 filament extruder that is designed to print more material without blockage. This extruder is made of brass, therefore has better durability and heat retention capability.

 

 

 

 

 

 

Filament Sensor

This printer has built-in filament sensor that can detect when the filament runs out. It has mechanical sensor that picks up the information that pauses the printing to help resume it later

 

 

 

 

 

 

Other Convenient Features

The bed of this 3D printer can easily be removed which helps in taking out the printed model right off the bed. It also has a filament spool that can be attached over the console for added stability while printing.

 

 

 

 

 

 

 

 

• Meanwell Power Supply: Ender 3 Max comes with UL Certified power supply which with a stable output ensuring the temperature fluctuations are minimized and protecting your printer from unexpected power surges. It can heat the hot bed to 110? in around 10 minutes.
• Tempered Carborundum Glass Platform: Enable the hotbed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer.
• All Metal Extruder, Filament Detector, Dual Cooling Fans in Hot End Kit 2 Sides : promotes better printing result, prevent filament wasting and reduces filament blockage
• Silent Motherboard. Backed by TMC2208 silent driver, reduce noise and wobbling during printing, smoother motion and quieter printing process.; BL touch installation also is available(not included in package, you can buy one if you need. Please flash firmware first if you use a BLTouch).
• Quick Installation: Creality ender 3 max comes almost assembled, which is much easier to assemble than Ender 3. You only need to spend few minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires.

Product Description

Creality's Ender 3 Max

Creality's Ender 3 Max

Creality's Ender 3 Max is a basic blast from the past. Here are our first impressions.

The main show of the Creality Ender 3 Max is its hefty slab of a build plate, here in Creality’s impressive-sounding carborundum glass. In normal speak, it’s a 300 x 300 mm flat sheet of glass, with a surface texture that grips the print when hot, and releases it when cold.

Standing tall above this print area is a Z-axis of 340 mm, 60 mm less than on the Creality CR-10, the printer the Ender 3 Max is closest.

Creality's Ender 3 Max

The print head itself has a curious design, with the push-fit coupling for the Bowden tube recessed below the top of the print head housing. If this remains as is on the finalized Ender 3 Max, users might have a tedious time removing the print head housing before accessing the push-fit for the Bowden tube. Maintenance and blockage-clearing action will be a pain in the posterior.

Creality's Ender 3 Max

Creality indicated to us that the Ender 3 Max will ship with a “silent” mainboard. We assumed that the printer would ship with some flavor of TMC stepper motor drivers for quiet operation. This doesn’t seem to be the case, though, with this preview printer whirring and whining away just as the Ender 3 did back in 2018. Cracking the printer open, we find Creality’s new 4.2.2 32-bit board, rocking non-replaceable A4988 stepper motor drivers

Creality's Ender 3 Max

Small change aside, we do quite like the Creality Ender 3 Max. It’s shaping up to be a decent simple big-volume printer, though there’s plenty of room for improvement both on Creality’s part pre-launch and for the user customizing their machine

We had initially pondered why the company would bother with a machine that, held against its more recent efforts, is a tad basic. When you use those pricier machines week in week out it gets all too easy to lose sight of how simplicity can be a good thing

• REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
• SAFE POWER SUPPLY: Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
• RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages.
• SEMI-ASSEMBLED KIT: several assembled parts This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics. 

Upgraded Ender-3 Pro 3D Printer 

More stable, More durable, Easier to operate.

Ender-3 Pro is an upgraded version of Ender-3, upgrade power supply, magnetic build surface plate, aluminum extrusion. Ender 3 Pro is the most suitable printer for beginners.

What's the difference between Ender 3 and Ender 3 pro?

(1) Y axis AL Profile updated from 4020 to 4040

(2) Power supply updated from normal version to brand mean well, which made by the listed company over 30 years, mature technology, provide you the best user experience and worth trying.

(3) Only takes 5 minutes, the heated bed can reach up the 110 degree, quite meet the requirement of printing various of filaments.

(4) Leveling nut updated to big twist version

(5) Cmagnetic sticker, which can better adhere to the platform than textured paper and glue. Easier to remove the model and solve the printing edge problem, more cost-effective.

Why choose Creality 3D Ender 3 Pro 3D Printer?

1. Fully Open Source: Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

2. Ideal Gift for Kids: This semi-assembled kit 3D printer is a perfect gift for kid, allow them to learn about the basic construction of 3D printers.

3. Ideal for STEM Projects: Invite imagination and innovation to student, help them discover the wonders of all the STEM fields

Easy to install

• Only 10 minutes with 20 screws assembly before the first printing, simple assembly but more stable performance, Win-Win for fun and time.

Magnetic Build Surface

• Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.

Upgraded extruder

• Upgraded extruder greatly reduces plugging risk and bad extrusion; Patent Technology: V-Slot with POM wheel make it move noiseless, smoothly and durable

SEMI-ASSEMBLED KIT:

several assembled parts This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.

Improved Mechanical Properties

• The Ender 3 Pro has been redesigned with a more sturdy, 40×40 aluminum extrusion for the Y-axis base. This should improve the overall stability of the printing surface.

Update V-Slot

• V-Slot cooperate with Prusa I3 frame: extremely innovative design, following the step of the trend, integrating with classic elements, create a new generation economic DIY 3D printers.

Safe Power Supply:

• Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.

Technical Specifications Ender-3 Pro FDM 3D Printer Properties Modeling Technology: FDM（Fused Deposition Modeling） Printing Size: 220*220*250mm

Printing Speed: ≤180mm/s, normal 30-60mm/s

Filament: 1.75mm PLA, ABS, Wood, TPU, Gradient color, carbon fiber, etc.

Working Mode: Online or SD card offline

File Format: STL, OBJ, AMF

Slice Software: Cura, Repetier-Host, Simplify3D

Ender-3 pro FDM 3D Printer Hardware

Machine Size: 440-440-465mm

Package Size: 595*495*165mm

N.W: 6.9KG G.W: 8.9KG Power Supply Input: AC100-120V/6.8A 200-240V/3.4A/ 50/60Hz

Output:DC 24 V 270W Ender-3 Pro FDM 3D Printer Extruder Hardware

Nozzle Diameter: Standard0.4mm，can be in 0.2, 0.3 mm

Printing Precision: ±0.1mm

Bed Temp.: ≤110℃